Key Takeaways
- The EOlife is the clinical device for ventilating patients; the EOlife X is the training version for manikins. They are not interchangeable.
- Both measure the same three numbers on every breath: insufflated volume, tidal volume and ventilation rate.
- Each uses its own single-use sensor: FlowSense for the EOlife, the factory-calibrated FlowSense X for the EOlife X.
- Agencies that buy the clinical device usually buy the trainer too, so crews practice on the same screen they will use in the field.
Two Devices, One Workflow
Archeon makes the EOlife line to answer a question bag-valve-mask ventilation has never answered well: how much air actually reached the lungs on that breath? Both devices sit between the bag and the mask or airway, read the airflow through a sensor, and show the result on a screen the operator can glance at while ventilating.
The difference is who is on the other end. The EOlife is built for patients in pre-hospital and hospital care. The EOlife X is built for training manikins in CPR, BLS and airway courses. The screens, measurements and setup steps mirror each other on purpose, so skills practiced on the trainer carry straight to the clinical device.
Side-By-Side Comparison
| EOlife | EOlife X | |
|---|---|---|
| Used on | Patients | Adult and pediatric training manikins (over 1 year) |
| Measures | Insufflated volume, tidal volume, ventilation frequency | Insufflated volume, tidal volume, ventilation frequency |
| Feedback | Tricolor bar graph against a 6 to 8 ml/kg tidal volume target; visual alarms | Live display in Monitored mode; no display in Blind mode |
| Modes | 30:2 and continuous, with a countdown timer for continuous ventilation | Monitored and Blind |
| Setup | Select patient height band, choose mode, ventilate | Same steps as the clinical device |
| Sensor | FlowSense, single-use | FlowSense X, single-use, factory-calibrated |
| Data | Data transfer cable (accessory) | Bluetooth export to the EOlife Connect app |
| In the box | Device, charger, 1 FlowSense sensor | Device, battery, charger, 1 FlowSense X sensor, case |
Specifications are taken from the manufacturer’s product information as listed on aedprofessionals.com. Refer to Archeon’s labeling and instructions for use before clinical use.
When You Need The Clinical EOlife
Buy the EOlife when the goal is ventilation quality on real patients: an EMS agency, a fire department, an emergency department or a rapid response team that bags patients and wants each breath measured as it is delivered. Patient height bands (140 to 160 cm, 160 to 180 cm, 180 to 200 cm) set the target before the first breath. For full-shift deployment, the EOlife Device Pro Package adds a carry case, a silicone protective sleeve and 30 FlowSense sensors.
When You Need The EOlife X
Buy the EOlife X when the goal is teaching. Monitored mode shows every breath on screen so students can correct volume and rate in real time. Blind mode records the same numbers without showing them, which gives instructors an honest skills check. Sessions export over Bluetooth to the EOlife Connect app for training records.
Why Many Programs Buy Both
Crews who first see ventilation numbers on a patient tend to discover they have been over-ventilating for years. Training on the EOlife X before the EOlife goes on the truck means the first time a medic reads that screen is in a classroom, not on a call. Training centers and agencies often quote one trainer per classroom and one clinical device per response vehicle on the same purchase order.
Budgeting For Sensors
Both sensors are single-use, so the recurring cost is sensors, not devices. Plan one FlowSense sensor per patient on the clinical side and one FlowSense X per training session on the trainer side. Both are sold singly or in packs of ten; live prices are shown on the device cards below and on aedprofessionals.com.
Preguntas Frecuentes
Can the EOlife X be used on a patient?
No. The EOlife X is a training device for manikins. The EOlife is the device for patient care.
Are the sensors interchangeable?
No. The EOlife uses the FlowSense sensor and the EOlife X uses the FlowSense X sensor. Both are single-use.
What does each device measure?
Both measure insufflated volume, tidal volume and ventilation frequency on every breath.
Can we buy both on one purchase order?
Yes. Call 888-541-2337 or request a quote for devices, sensors and spares together.
Fuentes
Este artículo es información general para compras y planeación de programas. No es consejo médico y no reemplaza el etiquetado del fabricante ni la capacitación.
